Categories
Categories

Floating Oil Hose Selection & Technical Support | DeepSee

Explore DeepSee floating oil hoses with technical drawings, relevant BV documentation and project-specific specification review. Send us your requirements.
Nov 11th,2026 13 Views
Catalog

How We Help You Specify a Floating Oil Hose
Before You Order

Before ordering a floating oil hose, you need to know how it will connect to your system, suit the operating conditions and meet the project specification. A product photograph alone cannot answer those questions.

At DeepSee, we do not offer full-size samples of these large, heavy marine hoses. We can begin the technical discussion with product specifications, construction drawings and relevant manufacturer documentation. Here is how we use that information to help you define your requirements before an order is placed.

Start with the hose position and operating conditions

Tell us where the hose will be installed. A mainline hose, a first-off-buoy hose and a tanker rail hose serve different positions in a floating hose string. That position affects the construction and flexibility requirements we need to discuss. Our Floating oil hose range shows the available hose types as a starting point.

We also need to understand the conveyed liquid, its composition and temperature, the required rated working pressure, and any specified vacuum or surge conditions. For a replacement, the existing datasheet and hose arrangement drawing are particularly useful. Matching diameter and length is only part of establishing compatibility with the system.

Review the construction and connections together

The construction drawing helps connect your operating requirements to the hose design. The inner lining must be suitable for the conveyed liquid; the reinforcement and end fittings form part of the pressure-bearing assembly; and the buoyancy material supports the floating configuration. These elements need to be considered together.

For the technical discussion, identify the required minimum bend radius and reserve buoyancy, including the basis used to calculate buoyancy. Electrical continuity or discontinuity should follow the system specification. We also need the flange details at both ends, including the standard, pressure class, drilling and sealing face. A flange pressure class alone does not define the rated working pressure of the complete hose assembly.

If your project specifies double carcass construction, our Double carcass floating mainline hose provides an example of this product configuration. If the primary carcass develops a leak, the secondary carcass can still ensure normal transfer for a short period. The damaged hose should be replaced promptly after the unloading operation is completed.

Review the BV documentation relevant to your configuration

Zebung, the manufacturer behind DeepSee, holds Bureau Veritas Statements of Compliance for floating hose prototypes assessed against OCIMF GMPHOM 2009. The manufacturer documents available for this discussion include:

  • Single carcass floating hose: 300 mm nominal bore, 10.7 m length and 21 bar rated working pressure.
  • Double carcass floating hose: 600 mm nominal bore, 10.7 m length and 21 bar rated working pressure.

These documents provide a specific starting point for a technical review. We discuss the proposed hose size, construction and operating requirements alongside the applicable documentation. A prototype statement has a defined scope; the documentation supporting your proposed configuration and the acceptance records required for your order still need to be identified.

Confirm testing and delivery documents with DeepSee

During the quotation stage, we discuss the hose specification and the documents needed for delivery with you. Share the inspection requirements in your project specification so that we can clarify the applicable tests, acceptance criteria and records to be included in the supply scope. Our Marine hose quality control  page introduces the factory inspection activities.

If your project requires an inspection and test plan, buyer attendance or independent third-party witnessing, include those requirements in your enquiry. We can then confirm the arrangements and any additional scope before production. Agreed review and witness points, document responsibilities and the process for resolving deviations help keep manufacturing and acceptance aligned.

The pre-order document review establishes the technical basis for your enquiry. Testing and acceptance for the delivered hoses remain part of the agreed order requirements.

Begin with an existing drawing or a short project brief

You do not need to prepare a complete new specification to start a conversation. Send your existing hose drawing or datasheet, if available, together with the information you already have:

  • Application and hose position, including whether this is a replacement or a new hose string.
  • Conveyed liquid, temperature range, required rated working pressure and any specified vacuum or surge conditions.
  • Nominal bore, hose length, quantity and flange details at both ends.
  • Single or double carcass requirement, and any specified buoyancy, bending or electrical requirements.
  • Required documentation, inspection arrangements, delivery destination and requested delivery date.

If some values have not been finalised, mark them as pending. This helps us focus the initial discussion on the details that still need to be resolved.

Send your floating hose enquiry to DeepSee

Whether you are replacing a section of an existing hose string or preparing a new project, we welcome your technical requirements. Send your floating hose requirements  to begin the discussion about configuration, applicable documentation and quotation scope.

Hello. How can I help you?
Name *
Email *
Company name *
Whatsapp/Phone number
Message
Hose type, Working condition, Medium, Quantity, Length, etc.